Duty rate for Conveyor or transmission belts or belting, of vulcanized rubber.

Published by at 9:18 pm under Tariff

Tariff Item Description of Goods Units of Measure MFN Tariff Applicable Preferential Tariffs
40.10 Conveyor or transmission belts or belting, of vulcanized rubber.
4010.1 Conveyor belts or belting:
4010.11 Reinforced only with metal
4010.11.10 Belts 9 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.11.10.10 Light duty - 9 %
4010.11.10.20 Heavy duty - 9 %
4010.11.20 Belting - 11 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.11.20.10 Light duty - 11 %
4010.11.20.20 Heavy duty - 11 %
4010.12 Reinforced only with textile materials - 11 %
4010.12.1 Belts: - 11 %
4010.12.11 Anti-oil, anti-solvent, designed for reverse roller coating machines - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
4010.12.11.00 Anti-oil, anti-solvent, designed for reverse roller coating machines - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
4010.12.19 Other - 9 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.12.19.10 Light duty - 9 %
4010.12.19.20 Heavy duty - 9 %
4010.12.2 Belting: - 9 %
4010.12.21 Of a thickness not exceeding 2.8 mm and a width exceeding 350 mm, reinforced with nylon, polyester or aramid fibres, for use in the manufacture of conveyor belts - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
4010.12.21.00 Of a thickness not exceeding 2.8 mm and a width exceeding 350 mm, reinforced with nylon, polyester or aramid fibres, for use in the manufacture of conveyor belts - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
4010.12.29 Other - 11 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.12.29.10 Light duty - 11 %
4010.12.29.20 Heavy duty - 11 %
4010.19 Other - 11 %
4010.19.1 Belts: - 11 %
4010.19.11 Of a tension rating not exceeding 26 kN/m - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
4010.19.11.00 Of a tension rating not exceeding 26 kN/m - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
4010.19.19 Other - 9 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.19.19.00 Other - 9 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.19.2 Belting: - 9 %
4010.19.21 Of a thickness not exceeding 2.8 mm and a width exceeding 350 mm, reinforced with nylon, polyester or aramid fibres, for use in the manufacture of conveyor belts - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
4010.19.21.00 Of a thickness not exceeding 2.8 mm and a width exceeding 350 mm, reinforced with nylon, polyester or aramid fibres, for use in the manufacture of conveyor belts - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
4010.19.29 Other - 11 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.19.29.10 Light duty - 11 %
4010.19.29.20 Heavy duty - 11 %
4010.3 Transmission belts or belting: - 11 %
4010.31 Endless transmission belts of trapezoidal cross-section (V-belts),
V-ribbed, of an outside circumference exceeding 60 cm but not exceeding 180 cm
- 11 %
4010.31.10 For use in the manufacture or repair of powered mowers for lawns, parks or sports-grounds, with the cutting device rotating in a horizontal plane - 6.5 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.31.10.00 For use in the manufacture or repair of powered mowers for lawns, parks or sports-grounds, with the cutting device rotating in a horizontal plane - 6.5 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.31.20 For use on textile machinery - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
4010.31.20.00 For use on textile machinery - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
4010.31.90 Other - 11 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.31.90.10 Automotive - 11 %
4010.31.90.90 Other - 11 %
4010.32 Endless transmission belts of trapezoidal cross-section (V-belts), other than V-ribbed, of an outside circumference exceeding 60 cm but not exceeding 180 cm - 11 %
4010.32.10 For use in the manufacture or repair of powered mowers for lawns, parks or sports-grounds, with the cutting device rotating in a horizontal plane - 6.5 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.32.10.00 For use in the manufacture or repair of powered mowers for lawns, parks or sports-grounds, with the cutting device rotating in a horizontal plane - 6.5 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.32.20 For use on textile machinery - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
4010.32.20.00 For use on textile machinery - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
4010.32.90 Other - 11 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.32.90.10 Automotive - 11 %
4010.32.90.90 Other - 11 %
4010.33 Endless transmission belts of trapezoidal cross-section (V-belts),
V-ribbed, of an outside circumference exceeding 180 cm but not exceeding 240 cm
- 11 %
4010.33.10 For use in the manufacture or repair of powered mowers for lawns, parks or sports-grounds, with the cutting device rotating in a horizontal plane - 6.5 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.33.10.00 For use in the manufacture or repair of powered mowers for lawns, parks or sports-grounds, with the cutting device rotating in a horizontal plane - 6.5 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.33.20 For use on textile machinery - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
4010.33.20.00 For use on textile machinery - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
4010.33.90 Other - 11 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.33.90.10 Automotive - 11 %
4010.33.90.90 Other - 11 %
4010.34 Endless transmission belts of trapezoidal cross-section (V-belts), other than V-ribbed, of an outside circumference exceeding 180 cm but not exceeding 240 cm - 11 %
4010.34.10 For use in the manufacture or repair of powered mowers for lawns, parks or sports-grounds, with the cutting device rotating in a horizontal plane - 6.5 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.34.10.00 For use in the manufacture or repair of powered mowers for lawns, parks or sports-grounds, with the cutting device rotating in a horizontal plane - 6.5 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.34.20 For use on textile machinery - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
4010.34.20.00 For use on textile machinery - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
4010.34.90 Other - 11 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.34.90.10 Automotive - 11 %
4010.34.90.90 Other - 11 %
4010.35 Endless synchronous belts, of an outside circumference exceeding 60 cm but not exceeding 150 cm - 11 %
4010.35.10 For use on textile machinery - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
4010.35.10.00 For use on textile machinery - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
4010.35.90 Other - 11 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.35.90.00 Other - 11 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.36 Endless synchronous belts, of an outside circumference exceeding 150 cm but not exceeding 198 cm - 11 %
4010.36.10 For use on textile machinery - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
4010.36.10.00 For use on textile machinery - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
4010.36.90 Other - 11 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.36.90.00 Other - 11 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.39 Other - 11 %
4010.39.10 Endless transmission belts of trapezoidal cross-section (V-belts), whether or not V-ribbed, of an outside circumference exceeding 240 cm - 11 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.39.10.00 Endless transmission belts of trapezoidal cross-section (V-belts), whether or not V-ribbed, of an outside circumference exceeding 240 cm - 11 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.39.20 For use in the manufacture or repair of powered mowers for lawns, parks or sports-grounds, with the cutting device rotating in a horizontal plane - 6.5 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.39.20.00 For use in the manufacture or repair of powered mowers for lawns, parks or sports-grounds, with the cutting device rotating in a horizontal plane - 6.5 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.39.30 For use on textile machinery;
Transmission belting, of a thickness not exceeding 6.8 mm, excluding belting of trapezoidal cross-section (V or multi V), whether or not embossed, for use in the manufacture of transmission belts
- Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
4010.39.30.00 For use on textile machinery;
Transmission belting, of a thickness not exceeding 6.8 mm, excluding belting of trapezoidal cross-section (V or multi V), whether or not embossed, for use in the manufacture of transmission belts
- Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
4010.39.90 Other - 11 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, IT, NT, SLT, PT: Free
4010.39.90.10 Automotive - 11 %
4010.39.90.90 Other - 11 %


For the latest tariff rate, please refer to CBSA

Comments

Leave a comment

Trackback Print this Print this Email this Email this Comments RSS

Leave a comment