Archive for September, 2009

Duty rate for Electric motors and generators (excluding generating sets).

Published by BoB under Tariff

Tariff Item Description of Goods Units of Measure MFN Tariff Applicable Preferential Tariffs
85.01 Electric motors and generators (excluding generating sets).
8501.10 Motors of an output not exceeding 37.5 W
8501.10.1 Gear motors:
8501.10.11 Electronic actuators for use in garden equipment;
For use with self-propelled vehicle assembly kits;
Of an output of less than 20 W, for use in the manufacture of portable cooling fans;
Of an output not exceeding 32 V, incorporating an electric motor having an external diameter of less than 7.62 cm, for use in the manufacture of revolving electric lamps for motor vehicles		 Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.10.11.00 Electronic actuators for use in garden equipment;
For use with self-propelled vehicle assembly kits;
Of an output of less than 20 W, for use in the manufacture of portable cooling fans;
Of an output not exceeding 32 V, incorporating an electric motor having an external diameter of less than 7.62 cm, for use in the manufacture of revolving electric lamps for motor vehicles		 NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.10.12 Synchronous and stepper gear motors and the following electric actuators:
Three-phase, 220 or 440 V, with output torque ratings exceeding 565 N.m and an angle rotation not exceeding 90 degrees;
120 or 240 V, single-phase;
280, 460 or 575 V, three-phase		 NMB 6 % CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.10.12.00 Synchronous and stepper gear motors and the following electric actuators:
Three-phase, 220 or 440 V, with output torque ratings exceeding 565 N.m and an angle rotation not exceeding 90 degrees;
120 or 240 V, single-phase;
280, 460 or 575 V, three-phase		 NMB 6 % CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.10.19 Other NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.10.19.1 Of an output of less than 18.65 W: NMB Free
8501.10.19.11 AC NMB Free
8501.10.19.12 DC brushless NMB Free
8501.10.19.13 Other DC NMB Free
8501.10.19.19 Other NMB Free
8501.10.19.2 Of an output of 18.65 W or more but not exceeding 37.5 W: NMB Free
8501.10.19.21 AC NMB Free
8501.10.19.22 DC brushless NMB Free
8501.10.19.23 Other DC NMB Free
8501.10.19.29 Other NMB Free
8501.10.9 Other: NMB Free
8501.10.91 AC electric motors for use in the manufacture of dehumidifiers;
For use in electric strikes, or in electronic lock systems or in components thereof;
For use with self-propelled vehicle assembly kits		 NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.10.91.00 AC electric motors for use in the manufacture of dehumidifiers;
For use in electric strikes, or in electronic lock systems or in components thereof;
For use with self-propelled vehicle assembly kits		 NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.10.99 Other NMB 6 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.10.99.1 Of an output of less than 18.65 W: NMB 6 %
8501.10.99.11 AC NMB 6 %
8501.10.99.12 DC brushless NMB 6 %
8501.10.99.13 Other DC NMB 6 %
8501.10.99.19 Other NMB 6 %
8501.10.99.2 Of an output of 18.65 W or more but not exceeding 37.5 W: NMB 6 %
8501.10.99.21 AC NMB 6 %
8501.10.99.22 DC brushless NMB 6 %
8501.10.99.23 Other DC NMB 6 %
8501.10.99.29 Other NMB 6 %
8501.20 Universal AC/DC motors of an output exceeding 37.5 W NMB 6 %
8501.20.10 Gear motors NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.20.10.10 Of an output exceeding 37.5 W but not exceeding 750 W NMB Free
8501.20.10.20 Of an output exceeding 750 W NMB Free
8501.20.90 Other NMB 4 % CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.20.90.10 Of an output exceeding 37.5 W but not exceeding 750 W NMB 4 %
8501.20.90.20 Of an output exceeding 750 W NMB 4 %
8501.3 Other DC motors; DC generators: NMB 4 %
8501.31 Of an output not exceeding 750 W NMB 4 %
8501.31.10 Gear motors;
For use in the manufacture of electric-hydraulic power units		 NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.31.10.1 Gear motors: NMB Free
8501.31.10.11 DC motors, of an output exceeding 37.5 W but not exceeding
75 W		 NMB Free
8501.31.10.12 DC motors, of an output exceeding 75 W but less than 746 W NMB Free
8501.31.10.13 DC motors, of an output of 746 W or more but not exceeding
750 W		 NMB Free
8501.31.10.20 For use in the manufacture of electric-hydraulic power units NMB Free
8501.31.20 Generators;
Other motors of an output exceeding 37.5 W but not exceeding 75 W		 NMB 4 % CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.31.20.10 DC generators NMB 4 %
8501.31.20.20 DC motors, of a kind used as the primary source of mechanical power for electrically powered vehicles of subheading 8703.90 NMB 4 %
8501.31.20.90 Other NMB 4 %
8501.31.30 Other motors of an output exceeding 75 W but not exceeding 750 W NMB 8 % CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.31.30.10 DC motors of an output exceeding 75 W but less than 746 W NMB 8 %
8501.31.30.20 DC motors, of an output of 746 W or more but not exceeding 750 W NMB 8 %
8501.32 Of an output exceeding 750 W but not exceeding 75 kW NMB 8 %
8501.32.10 Actuators;
Brushless geared shaft motors for use in electrical hand tools;
Gear motors for use in the manufacture of machinery or equipment;
Motors for use in the manufacture of lifts (elevators);
Motors of a voltage of 20 V or more but not exceeding 75 V, for use in the manufacture of fork-lift trucks		 NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.32.10.10 Gear motors NMB Free
8501.32.10.90 Other NMB Free
8501.32.20 Motors for use as the primary source of mechanical power for electric powered vehicles of subheading 8703.90 NMB 6 % CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.32.20.00 Motors for use as the primary source of mechanical power for electric powered vehicles of subheading 8703.90 NMB 6 % CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.32.90 Other NMB 2 % CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.32.90.10 DC generators NMB 2 %
8501.32.90.20 Gear motors NMB 2 %
8501.32.90.90 Other NMB 2 %
8501.33 Of an output exceeding 75 kW but not exceeding 375 kW NMB 2 %
8501.33.10 Gear motors NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.33.10.10 DC motors, of an output exceeding 75 kW but not exceeding 149 kW NMB Free
8501.33.10.20 DC motors, of an output exceeding 149 kW but not exceeding 375 kW NMB Free
8501.33.20 Generators;
Other motors of an output exceeding 75 kW but not exceeding 149 kW		 NMB 2.5 % CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.33.20.1 DC generators: NMB 2.5 %
8501.33.20.11 Of an output exceeding 75 kW but not exceeding 149 kW NMB 2.5 %
8501.33.20.12 Of an output exceeding 149 kW but not exceeding 375 kW NMB 2.5 %
8501.33.20.90 Other NMB 2.5 %
8501.33.30 Other motors of an output exceeding 149 kW but not exceeding 375 kW NMB 9 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.33.30.00 Other motors of an output exceeding 149 kW but not exceeding 375 kW NMB 9 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.34 Of an output exceeding 375 kW NMB 9 %
8501.34.10 Gear motors NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.34.10.00 Gear motors NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.34.20 Other motors NMB 6 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.34.20.00 Other motors NMB 6 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.34.30 DC generators NMB 2.5 % CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.34.30.00 DC generators NMB 2.5 % CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.40 Other AC motors, single-phase NMB 2.5 %
8501.40.10 External rotor permanent split capacitor motors, of a power exceeding 30 W or more but not exceeding 120 W, for use in the manufacture of cooker (range) hoods;
Gear motors for use in the manufacture of machinery or equipment;
Other motors for use in the manufacture of submersible water pump systems with a pump diameter exceeding 8.89 cm		 NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.40.10.00 External rotor permanent split capacitor motors, of a power exceeding 30 W or more but not exceeding 120 W, for use in the manufacture of cooker (range) hoods;
Gear motors for use in the manufacture of machinery or equipment;
Other motors for use in the manufacture of submersible water pump systems with a pump diameter exceeding 8.89 cm		 NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.40.2 Other, of an output exceeding 37.5 W but not exceeding 750 W: NMB Free
8501.40.21 Actuators for opening and closing skylights;
Clutch and needle positioning motors, for use with industrial sewing machines;
For use in the manufacture of fans;
Gear motors for use in paper towel making machines;
Motors which incorporate an oscillating mechanism;
Motors of a power less than 1 horsepower for use in the manufacture of portable mortar mixers;
Of an output exceeding 180 W, for use in the manufacture of water pumps;
Of an output of 250 W, for use in the manufacture of residential garage door openers;
Permanent split capacitor motors, with or without external shafts or external rotor type, of an output of 40 W or more but not exceeding
375 W, for use in the manufacture of air filtration units, combined air filtration/ventilation units, the foregoing with or without heat recovery capabilities		 NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8501.40.21.1 Motors which incorporate an oscillating mechanism: NMB Free
8501.40.21.11 Of an output exceeding 37.5 W but not exceeding 75 W NMB Free
8501.40.21.12 Of an output exceeding 75 W but not exceeding 750 W NMB Free
8501.40.21.2 Clutch and needle positioning motors, for use with industrial sewing machines: NMB Free
8501.40.21.21 Of an output exceeding 37.5 W but not exceeding 75 W NMB Free
8501.40.21.22 Of an output exceeding 75 W but not exceeding 750 W NMB Free
8501.40.21.9 Other: NMB Free
8501.40.21.91 Of an output exceeding 37.5 W but not exceeding 75 W NMB Free
8501.40.21.92 Of an output exceeding 75 W but not exceeding 750 W NMB Free
8483.90.20.20 Of gearing, gear boxes and other speed changers - Free
8483.90.20.90 Other - Free
8483.90.30 Of the goods of tariff item No. 8483.20.00, 8483.30.00 or 8483.60.90 - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8483.90.30.10 Of the goods of tariff item No. 8483.60.90 - Free
8483.90.30.20 Of the goods of tariff item No. 8483.20.00 or 8483.30.00 - Free


For the latest tariff rate, please refer to CBSA

Related articles

Leave a comment

Duty rate for Machine-tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine-tools working by removing metal, or cermets, not elsewhere specified or included.

Published by BoB under Tariff

Tariff Item Description of Goods Units of Measure MFN Tariff Applicable Preferential Tariffs
84.61 Machine-tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine-tools working by removing metal, or cermets, not elsewhere specified or included.
8461.20 Shaping or slotting machines
8461.20.10 Numerically controlled Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8461.20.10.10 Shaping machines NMB Free
8461.20.10.20 Slotting machines NMB Free
8461.20.90 Other NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8461.40.00.94 Gear shapers NMB Free
8461.40.00.95 Gear grinding machines, used or rebuilt NMB Free
8461.40.00.96 Other gear grinding machines NMB Free
8461.40.00.97 Gear finishing machines NMB Free
8461.50 Sawing or cutting-off machines NMB Free
8461.50.1 Numerically controlled: NMB Free
8461.50.11 Horizontal band sawing machines, of a round or square capacity not exceeding 101.6 cm, excluding block and plate band sawing machines and computer numerically controlled band sawing machines with programmable magazines NMB 6 % AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8461.50.11.10 Used or rebuilt NMB 6 %
8461.50.11.90 Other NMB 6 %
8461.50.19 Other NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8461.50.19.1 Used or rebuilt: NMB Free
8461.50.19.11 Sawing machines NMB Free
8461.50.19.12 Cutting-off machines NMB Free
8461.50.19.9 Other: NMB Free
8461.50.19.91 Sawing machines NMB Free
8461.50.19.92 Cutting-off machines NMB Free
8461.50.9 Other: NMB Free
8461.50.91 Horizontal band sawing machines, of a round or square capacity not exceeding 101.6 cm, excluding block and plate band sawing machines NMB 6 % AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8461.50.91.10 Used or rebuilt NMB 6 %
8461.50.91.90 Other NMB 6 %
8461.50.99 Other NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8461.50.99.10 Used or rebuilt NMB Free
8461.50.99.90 Other NMB Free
8461.90 Other NMB Free
8462.10.00.99 Other NMB Free


For the latest tariff rate, please refer to CBSA

Related articles

Leave a comment

Duty rate for Sanitary ware and parts thereof, of iron or steel.

Published by BoB under Tariff

Tariff Item Description of Goods Units of Measure MFN Tariff Applicable Preferential Tariffs
73.24 Sanitary ware and parts thereof, of iron or steel.
7324.10.00 Sinks and wash basins, of stainless steel 7 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
7324.10.00.1 Sinks: 7 %
7324.10.00.11 Kitchen NMB 7 %
7324.10.00.19 Other NMB 7 %
7324.10.00.2 Wash basins: NMB 7 %
7324.10.00.21 Portable NMB 7 %
7324.10.00.29 Other NMB 7 %
7324.2 Baths: NMB 7 %
7324.21.00 Of cast iron, whether or not enamelled NMB 7 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
7324.21.00.00 Of cast iron, whether or not enamelled NMB 7 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
7324.29 Other NMB 7 %
7324.29.10 Stampings and assemblies thereof, for use in the manufacture of bath tubs NMB 4.5 % CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
7324.29.10.00 Stampings and assemblies thereof, for use in the manufacture of bath tubs NMB 4.5 % CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
7324.29.90 Other NMB 7 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
7324.29.90.10 Stainless steel NMB 7 %
7324.29.90.20 Porcelain enamelled steel NMB 7 %
7324.29.90.90 Other NMB 7 %
7324.90.00 Other, including parts NMB 6.5 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
7324.90.00.1 Sinks: NMB 6.5 %
7324.90.00.11 Kitchen, porcelain enamelled cast iron NMB 6.5 %
7324.90.00.12 Kitchen, porcelain enamelled steel NMB 6.5 %
7324.90.00.19 Other NMB 6.5 %
7324.90.00.2 Wash basins: NMB 6.5 %
7324.90.00.21 Porcelain enamelled cast iron NMB 6.5 %
7324.90.00.29 Other NMB 6.5 %
7324.90.00.3 Flushing cisterns: NMB 6.5 %
7324.90.00.31 Of stainless steel NMB 6.5 %
7324.90.00.39 Other NMB 6.5 %
7324.90.00.40 Bidets and urinals NMB 6.5 %
7324.90.00.9 Other: NMB 6.5 %
7324.90.00.91 Shower cabinets - 6.5 %
7324.90.00.92 Bed pans of stainless steel - 6.5 %
7324.90.00.99 Other - 6.5 %


For the latest tariff rate, please refer to CBSA

Related articles

Leave a comment

Duty rate for Artists’, students’ or signboard painters’ colours, modifying tints, amusement colours and the like, in tablets, tubes, jars, bottles, pans or in similar forms or packings.

Published by BoB under Tariff

Tariff Item Description of Goods Units of Measure MFN Tariff Applicable Preferential Tariffs
32.13 Artists’, students’ or signboard painters’ colours, modifying tints, amusement colours and the like, in tablets, tubes, jars, bottles, pans or in similar forms or packings.
3213.10.00 Colours in sets 6.5 % AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
3213.10.00.00 Colours in sets - 6.5 % AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
3213.90 Other - 6.5 %
3213.90.10 Water colours, in liquid or powder form, in jars, bottles or tins - 6.5 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
3213.90.10.00 Water colours, in liquid or powder form, in jars, bottles or tins - 6.5 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
3213.90.90 Other - 6.5 % AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
3213.90.90.10 Ceramic glazes for hobby use - 6.5 %
3213.90.90.90 Other - 6.5 %


For the latest tariff rate, please refer to CBSA

Related articles

Leave a comment

Duty rate for Footwear with outer soles of rubber, plastics, leather or composition leather and uppers of leather.

Published by BoB under Tariff

Tariff Item Description of Goods Units of Measure MFN Tariff Applicable Preferential Tariffs
64.03 Footwear with outer soles of rubber, plastics, leather or composition leather and uppers of leather.
6403.1 Sports footwear:
6403.12 Ski-boots, cross-country ski footwear and snowboard boots
6403.12.10 Downhill ski-boots Free LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
6403.12.10.10 Men’s or boys’ PAR Free
6403.12.10.20 Women’s or girls’ PAR Free
6403.12.10.30 Children’s PAR Free
6403.12.20 Cross-country ski footwear PAR 18 % LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT: Free
6403.12.20.10 Men’s or boys’ PAR 18 %
6403.12.20.20 Women’s or girls’ PAR 18 %
6403.12.20.30 Children’s PAR 18 %
6403.12.30 Snowboard boots PAR 18 % LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT: Free
6403.12.30.10 Men’s or boys’ PAR 18 %
6403.12.30.20 Women’s or girls’ PAR 18 %
6403.12.30.30 Children’s PAR 18 %
6403.19 Other PAR 18 %
6403.19.10 For an individual with a defective or abnormal foot or ankle, when purchased on the written order of a registered medical practitioner PAR Free LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
6403.19.10.00 For an individual with a defective or abnormal foot or ankle, when purchased on the written order of a registered medical practitioner PAR Free LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
6403.19.20 Other footwear for riding, golfing, hiking, climbing, curling, bowling, skating or training including track and running PAR 18 % LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
6403.19.20.10 Riding PAR 18 %
6403.19.20.2 Golf: PAR 18 %
6403.19.20.21 Men’s or boys’ PAR 18 %
6403.19.20.22 Women’s or girls’ PAR 18 %
6403.19.20.3 Hiking or climbing: PAR 18 %
6403.19.20.31 Men’s or boys’ PAR 18 %
6403.19.20.32 Women’s or girls’ PAR 18 %
6403.19.20.33 Children’s PAR 18 %
6403.19.20.40 Curling PAR 18 %
6403.19.20.5 Bowling: PAR 18 %
6403.19.20.51 Men’s or boys’ PAR 18 %
6403.19.20.52 Women’s or girls’ PAR 18 %
6403.19.20.60 Skating PAR 18 %
6403.19.20.7 Training, including track or running: PAR 18 %
6403.19.20.71 Men’s or boys’ PAR 18 %
6403.19.20.72 Women’s or girls’ PAR 18 %
6403.19.20.73 Children’s PAR 18 %
6403.19.90 Other PAR 18 % LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
6403.19.90.10 Soccer PAR 18 %
6403.19.90.20 Other football PAR 18 %
6403.19.90.30 Baseball PAR 18 %
6403.19.90.90 Other PAR 18 %
6403.20.00 Footwear with outer soles of leather, and uppers which consist of leather straps across the instep and around the big toe PAR 18 % LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
6403.20.00.00 Footwear with outer soles of leather, and uppers which consist of leather straps across the instep and around the big toe PAR 18 % LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
6403.40.00 Other footwear, incorporating a protective metal toe-cap PAR 18 % LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT: Free
6403.40.00.10 With bottoms of rubber or plastics and shafts of leather, covering the ankle (eg. felt pack boots) PAR 18 %
6403.40.00.20 Other, covering the ankle PAR 18 %
6403.40.00.90 Other PAR 18 %
6403.5 Other footwear with outer soles of leather: PAR 18 %
6403.51.00 Covering the ankle PAR 18 % LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
6403.51.00.10 Work PAR 18 %
6403.51.00.2 Cowboy boots: PAR 18 %
6403.51.00.21 Men’s or boys’ PAR 18 %
6403.51.00.22 Women’s, girls’ or children’s PAR 18 %
6403.51.00.9 Other: PAR 18 %
6403.51.00.91 Men’s or boys’ PAR 18 %
6403.51.00.92 Women’s or girls’ PAR 18 %
6403.51.00.93 Children’s PAR 18 %
6403.59 Other PAR 18 %
6403.59.10 For an individual with a defective or abnormal foot or ankle, when purchased on the written order of a registered medical practitioner;
Pointe shoes or block toe shoes, for professional dancers employed by full-time dance companies which meet Canada Council standards of professionalism or for ballet students in full-time attendance at a ballet school which meets Canada Council curriculum standards		 PAR Free LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
6403.59.10.10 For an individual with a defective or abnormal foot or ankle, when purchased on the written order of a registered medical practitioner PAR Free
6403.59.10.20 Pointe shoes or block toe shoes, for professional dancers employed by full-time dance companies which meet Canada Council standards of professionalism or for ballet students in full-time attendance at a ballet school which meets Canada Council curriculum standards PAR Free
6403.59.20 Other women’s footwear, valued at $30 or more per pair PAR 11 % LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
6403.59.20.10 Work PAR 11 %
6403.59.20.20 Slippers PAR 11 %
6403.59.20.90 Other PAR 11 %
6403.59.90 Other PAR 18 % LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
6403.59.90.10 Work PAR 18 %
6403.59.90.2 Slippers: PAR 18 %
6403.59.90.21 Men’s or boys’ PAR 18 %
6403.59.90.22 Women’s or girls’ PAR 18 %
6403.59.90.23 Children’s PAR 18 %
6403.59.90.9 Other: PAR 18 %
6403.59.90.91 Men’s or boys’ PAR 18 %
6403.59.90.92 Women’s or girls’ PAR 18 %
6403.59.90.93 Children’s PAR 18 %
6403.9 Other footwear: PAR 18 %
6403.91.00 Covering the ankle PAR 18 % LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
6403.91.00.10 Work PAR 18 %
6403.91.00.2 Cowboy boots: PAR 18 %
6403.91.00.21 Men’s or boys’ PAR 18 %
6403.91.00.22 Women’s or girls’ PAR 18 %
6403.91.00.23 Children’s PAR 18 %
6403.91.00.3 Footwear made on a base or platform of wood, not having an inner sole or a protective metal toe-cap: PAR 18 %
6403.91.00.31 Men’s or boys’ PAR 18 %
6403.91.00.32 Women’s, girls’ or children’s PAR 18 %
6403.91.00.9 Other: PAR 18 %
6403.91.00.91 Men’s or boys’ PAR 18 %
6403.91.00.92 Women’s or girls’ PAR 18 %
6403.91.00.93 Children’s PAR 18 %
6403.99 Other PAR 18 %
6403.99.10 For an individual with a defective or abnormal foot or ankle, when purchased on the written order of a registered medical practitioner PAR Free LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
6403.99.10.00 For an individual with a defective or abnormal foot or ankle, when purchased on the written order of a registered medical practitioner PAR Free LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
6403.99.30 Other women’s footwear, valued at $30 or more per pair PAR 11 % LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
6403.99.30.00 Other women’s footwear, valued at $30 or more per pair PAR 11 % LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
6403.99.90 Other PAR 18 % LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
6403.99.90.10 Work PAR 18 %
6404.11.19.32 Women’s or girls’ PAR 18 %
6404.11.19.33 Children’s PAR 18 %
6404.11.19.90 Other PAR 18 %
6404.11.9 Other: PAR 18 %
6404.11.91 Hiking footwear PAR 18 % LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
6404.11.91.10 Men’s or boys’ PAR 18 %
6404.11.91.20 Women’s or girls’ PAR 18 %
6404.11.91.30 Children’s PAR 18 %
6404.11.99 Other PAR 18 % LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
6404.11.99.10 Soccer PAR 18 %
6404.11.99.2 Training, including track or running: PAR 18 %
6404.11.99.21 Men’s or boys’ PAR 18 %
6404.11.99.22 Women’s or girls’ PAR 18 %
6404.11.99.23 Children’s PAR 18 %
6404.11.99.3 Tennis: PAR 18 %
6404.11.99.31 Men’s or boys’ PAR 18 %
6404.11.99.32 Women’s or girls’ PAR 18 %
6404.11.99.33 Children’s PAR 18 %
6404.11.99.90 Other PAR 18 %


For the latest tariff rate, please refer to CBSA

Related articles

Leave a comment

Duty rate for Other weft pile fabrics

Published by BoB under Tariff

Tariff Item Description of Goods Units of Measure MFN Tariff Applicable Preferential Tariffs
5801.33 Other weft pile fabrics
5801.33.10 For use in the manufacture of apparel Free LDCT, GPT, UST, MT, CIAT, CT, CRT, IT, NT, SLT, PT: Free
5801.33.10.00 For use in the manufacture of apparel KGM Free LDCT, GPT, UST, MT, CIAT, CT, CRT, IT, NT, SLT, PT: Free
5801.33.90 Other KGM 14 % LDCT, UST, MT, CIAT, CT, CRT, IT, NT, SLT, PT: Free
5801.33.90.00 Other KGM 14 % LDCT, UST, MT, CIAT, CT, CRT, IT, NT, SLT, PT: Free


For the latest tariff rate, please refer to CBSA

Related articles

Leave a comment

Duty rate for Other woven fabrics, containing 85% or more by weight of synthetic filaments:

Published by BoB under Tariff

Tariff Item Description of Goods Units of Measure MFN Tariff Applicable Preferential Tariffs
5407.7 Other woven fabrics, containing 85% or more by weight of synthetic filaments:
5407.71.00 Unbleached or bleached 14 % LDCT, UST, MT, CIAT, CT, IT, NT, SLT, PT: Free
5407.71.00.1 For apparel: 14 %
5407.71.00.11 Of a weight not exceeding 170 g/m^2 KGM 14 %
5407.71.00.12 Of a weight exceeding 170 g/m^2 KGM 14 %
5407.71.00.2 For non-apparel: KGM 14 %
5407.71.00.21 Of a weight not exceeding 170 g/m^2 KGM 14 %
5407.71.00.22 Of a weight exceeding 170 g/m^2 KGM 14 %
5407.72.00 Dyed KGM 14 % LDCT, UST, MT, CIAT, CT, IT, NT, SLT, PT: Free
5407.72.00.1 For apparel: KGM 14 %
5407.72.00.11 Of a weight not exceeding 170 g/m^2 KGM 14 %
5407.72.00.12 Of a weight exceeding 170 g/m^2 KGM 14 %
5407.72.00.2 For non-apparel: KGM 14 %
5407.72.00.21 Of a weight not exceeding 170 g/m^2 KGM 14 %
5407.72.00.22 Of a weight exceeding 170 g/m^2 KGM 14 %


For the latest tariff rate, please refer to CBSA

Related articles

Leave a comment

Duty rate for Mats

Published by BoB under Tariff

Tariff Item Description of Goods Units of Measure MFN Tariff Applicable Preferential Tariffs
7019.31 Mats
7019.31.10 Solely of high silica glass fibres, the fibres, exclusive of coating, containing 90% or more by weight of combined silicon, evaluated as silicon dioxide (SiO2) Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
7019.31.10.00 Solely of high silica glass fibres, the fibres, exclusive of coating, containing 90% or more by weight of combined silicon, evaluated as silicon dioxide (SiO2) KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
7019.31.90 Other KGM 9.5 % CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
7019.31.90.1 Continuous strand: KGM 9.5 %
7019.31.90.11 Shingle mat KGM 9.5 %
7019.31.90.19 Other KGM 9.5 %
7019.31.90.2 Solely of glass fibres: KGM 9.5 %
7019.31.90.21 Shingle mat KGM 9.5 %
7019.31.90.29 Other KGM 9.5 %
7019.31.90.90 Other KGM 9.5 %


For the latest tariff rate, please refer to CBSA

Related articles

Leave a comment

Duty rate for Steam turbines and other vapour turbines.

Published by BoB under Tariff

Tariff Item Description of Goods Units of Measure MFN Tariff Applicable Preferential Tariffs
84.06 Steam turbines and other vapour turbines.
8406.10.00 Turbines for marine propulsion Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8406.10.00.00 Turbines for marine propulsion NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8406.8 Other turbines: NMB Free
8406.81.00 Of an output exceeding 40 MW NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8406.81.00.10 Stationary steam turbines NMB Free
8406.81.00.90 Other NMB Free
8406.82.00 Of an output not exceeding 40 MW NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8406.82.00.10 Stationary steam turbines NMB Free
8406.82.00.90 Other NMB Free
8406.90 Parts NMB Free
8406.90.10 Blade diaphragms, spindle discs and shafts, wholly or in chief part of metal, for the repair or remanufacture of steam turbines or parts thereof;
Electro-mechanical speed regulators and parts thereof, for steam turbines		 NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8406.90.10.00 Blade diaphragms, spindle discs and shafts, wholly or in chief part of metal, for the repair or remanufacture of steam turbines or parts thereof;
Electro-mechanical speed regulators and parts thereof, for steam turbines		 - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8406.90.2 Other parts of the goods of tariff item No. 8406.10.00: - Free
8406.90.21 Rotors, not further advanced than cleaned or machined for removal of fins, gates, sprues or risers, or to permit location in finishing machinery - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8406.90.21.00 Rotors, not further advanced than cleaned or machined for removal of fins, gates, sprues or risers, or to permit location in finishing machinery - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8406.90.22 Rotors, finished for final assembly - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8406.90.22.00 Rotors, finished for final assembly - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8406.90.23 Blades, rotating or stationary - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8406.90.23.00 Blades, rotating or stationary - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8406.90.29 Other - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8406.90.29.00 Other - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8406.90.3 Other parts of the goods of tariff item No. 8406.81.00 or 8406.82.00: - Free
8406.90.31 Rotors, not further advanced than cleaned or machined for removal of fins, gates, sprues or risers, or to permit location in finishing machinery, wholly or in chief part of metal, for the repair or remanufacture of steam turbines or parts thereof - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8406.90.31.00 Rotors, not further advanced than cleaned or machined for removal of fins, gates, sprues or risers, or to permit location in finishing machinery, wholly or in chief part of metal, for the repair or remanufacture of steam turbines or parts thereof - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8406.90.32 Other rotors, not further advanced than cleaned or machined for removal of fins, gates, sprues or risers, or to permit location in finishing machinery - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8406.90.32.00 Other rotors, not further advanced than cleaned or machined for removal of fins, gates, sprues or risers, or to permit location in finishing machinery - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8207.19.10 Augers, other than those to be employed in the exploration or drilling for water, and parts thereof;
Non-diamond type core drill bits to be employed in the exploration or drilling for water, oil or natural gas and parts thereof;
Parts of core drills with working parts other than of cermets;
Polycrystalline diamond elements for use in the manufacture of drilling bits to be employed in the exploration or drilling for oil or natural gas;
Rotary rock drilling bits and parts thereof;
Other tools excluding the following:
Diamond type core drill bits;
Underground piercing tools of a diameter of less than 15.2 cm		 - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8207.19.10.1 Augers, other than those used in the exploration or drilling for water, and parts thereof: - Free
8207.19.10.11 Augers NMB Free
8207.19.10.19 Parts - Free
8207.19.10.2 Non-diamond type core drill bits used in the exploration or drilling for water, oil or natural gas and parts thereof: - Free
8207.19.10.21 Drill bits NMB Free
8207.19.10.29 Parts - Free
8207.19.10.30 Parts of core drills with working parts other than of cermets;
polycrystalline diamond elements for use in the manufacture of drilling bits to be employed in the exploration or drilling for oil or natural gas		 - Free
8207.19.10.4 Rotary rock drilling bits and parts thereof: - Free
8207.19.10.41 Drill bits NMB Free
8207.19.10.49 Parts - Free
8207.19.10.9 Other tools excluding the following:
Diamond type core drill bits;
Underground piercing tools of a diameter of less than 15.2 cm:		 - Free
8207.19.10.91 Percussion rock drill bits NMB Free
8207.19.10.99 Other NMB Free
8207.19.20 Other parts, with working part of cermets NMB 3.5 % AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8207.19.20.00 Other parts, with working part of cermets - 3.5 % AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8207.19.90 Other - 2.5 % AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
8207.19.90.1 Other rock drilling or earth boring tools: - 2.5 %
8207.19.90.11 Diamond type core drill bits NMB 2.5 %
8207.19.90.19 Other NMB 2.5 %
8207.19.90.90 Other - 2.5 %


For the latest tariff rate, please refer to CBSA

Related articles

Leave a comment

Duty rate for Glassware of a kind used for table, kitchen, toilet, office, indoor decoration or similar purposes (other than that of heading 70.10 or 70.18).

Published by BoB under Tariff

Tariff Item Description of Goods Units of Measure MFN Tariff Applicable Preferential Tariffs
70.13 Glassware of a kind used for table, kitchen, toilet, office, indoor decoration or similar purposes (other than that of heading 70.10 or 70.18).
7013.10.00 Of glass-ceramics Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
7013.10.00.00 Of glass-ceramics NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
7013.2 Stemware drinking glasses, other than of glass-ceramics: NMB Free
7013.22.00 Of lead crystal NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
7013.22.00.00 Of lead crystal NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
7013.28.00 Other NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
7013.28.00.10 Of cut glass NMB Free
7013.28.00.90 Other NMB Free
7013.3 Other drinking glasses, other than of glass-ceramics: NMB Free
7013.33.00 Of lead crystal NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
7013.91.00.11 Bowls NMB Free
7013.91.00.12 Vases NMB Free
7013.91.00.19 Other NMB Free
7013.91.00.9 Other: NMB Free
7013.91.00.91 Bowls NMB Free
7013.91.00.92 Vases NMB Free
7013.91.00.99 Other NMB Free
7013.99.00 Other NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
7013.99.00.1 Cut glassware: NMB Free
7013.99.00.11 Vases NMB Free
7013.99.00.12 Bowls NMB Free
7013.99.00.19 Other NMB Free
7013.99.00.9 Other: NMB Free
7013.99.00.91 Ash trays NMB Free
7013.99.00.92 Bowls excluding fish bowls NMB Free
7013.99.00.93 Fish bowls NMB Free
7013.99.00.94 Vases NMB Free
7013.99.00.95 Decorative ware NMB Free
7013.99.00.99 Other NMB Free
7014.00.00 Signalling glassware and optical elements of glass (other than those of heading 70.15), not optically worked. NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT: Free
7014.00.00.10 Blanks for reflectors or refractors NMB Free
7014.00.00.20 Other optical lens blanks NMB Free
7014.00.00.30 Other lens blanks NMB Free
7014.00.00.40 Fresnel lenses for lamps - Free
7014.00.00.90 Other - Free


For the latest tariff rate, please refer to CBSA

Related articles

Leave a comment

« Prev - Next »